D&E Event

Design Automation & Embedded Systems

Mapping road surface quality with a NI PXI system

Mapping road surface quality with a NI PXI system

door CN Rood

Kiwa KOAC is the leading independent company in the Netherlands for research and consultancy in the field of mobility infrastructure. Kiwa KOAC has a number of test vehicles and systems to test all characteristics that may be applicable to the design, construction and management of roads, industrial estates and dike coverings. The tests focus on capturing road surface data, recording the structural condition, loads applied to the structure and environmental aspects. To control the sensor systems and collect data, Kiwa KOAC uses a NI PXI system. We spoke to Johan Mulderij (Software Specialist at Kiwa KOAC Road Testing) about Kiwa KOAC, the NI PXI system and the cooperation with CN Rood.

 

Road safety and managing the road network cost-effectively

Kiwa KOAC's services are used to ensure road safety and manage the road network cost-effectively. Johan Mulderij: "Government bodies have drawn up standards that roads must meet during construction and during their service life. Through material testing and on-site measurements, we check whether these requirements are met and advise the road authority on measures to be taken to ensure that the road remains in good condition for as long as possible."

 

Measuring strength, flatness and skid resistance

To map the properties of a surface, there are different types of measuring vehicles and measuring systems.

Johan Mulderij gives an overview of some of the test systems: "We use a Falling Weight Deflectometer (FWD) to record the strength of a pavement or embankment using a mechanical force pulse. We record longitudinal flatness and texture (skid resistance) with a High Speed Road Profiler (HSRP) that measures distance to the road and vertical accelerations, allowing us to make statements about flatness characteristics and texture. Our most advanced measuring vehicle also has a Laser Crack Measuring System (LCMS) on board. LCMS consists of two laser sensors that both sample half a lane and can record the height and reflectance of every square millimetre of road surface in both the transverse and longitudinal directions at driving speeds of up to 100 km/h. This allows us to make statements on longitudinal and transverse flatness, transverse slope, curve radius, cracking and fraying (stone loss). This provides very large amounts of measurement data, up to 1 TB per measurement day. In addition, we always capture road images with a camera and record GPS position.

 

NI PXI data acquisition system since 2005

Over the years, many different solutions have been used to control the systems and for data acquisition.

Johan Mulderij: "In 2005, we replaced our own developed system with National Instruments PXI hardware and LabVIEW software. With the first PXI systems, there were still quite a few specialised PXI modules (parallel input, serial input, counter-timer, firewire camera, analogue input, bridge sensor input) and also a lot of extra electronics to control the systems. Since 2009, we have been using an FPGA board that has made many of the specialised PXI modules obsolete. Our current PXIe systems use only a Bridge input module in addition to the FPGA card because of the power cabinet for skid testing. All other signals (lasers, accelerations, temperatures, water flow) are read in via the FPGA card. The FPGA card also controls all kinds of valves and relays for measurement control and timing of all signals. We store the data, on a USB stick and SSD disk. Through our processing software, we process the measurement data and are thus able to report the data as PDF, EXCEL, Files for road management systems, GoogleEarth KML files, GeoJSON files or XML files.

 

New NI PXI system with CN Rood

The current system has received upgrades in recent years, such as replacing the hard disk with SSD, adding more measurement tasks, running a newer version of Windows and linking the system to the internet (with firewall and virus scanner). As a result, the system is running into capacity limits.

Johan Mulderij: "We want to replace the PXI Controllers. The rest of the system (PXIe chassis, FPGA card, Bridge input module) is still working fine and everything is available through CN Rood. CN Rood is our regular contact for all NI products. This cooperation is very good. They are very reliable and are also very cooperative.

Gerelateerd:


Email:
Website: http://cnrood.com

CN Rood

Degelijk.  Betrouwbaar. Kennispartner.

De CN Rood groep is koploper in kennis en oplossingen op het gebied van test- en meetapparatuur. We onderscheiden ons met een persoonlijke en klantgerichte aanpak. Onze klanten zoeken vaak niet een product, maar een oplossing en wij hebben allemaal de gedrevenheid om mee te werken aan die oplossing. Wat wij het liefste doen: continu bezig zijn met de nieuwste ontwikkelingen op het gebied van test- en meetapparatuur. Nu, en in de toekomst. Want daar ligt nu eenmaal onze passie: het precies willen weten. Zo kunnen we onze klanten optimaal verder helpen.

Wij denken mee, adviseren en begeleiden onze klanten in het maken van de juiste keuze in hun test- en meetapparatuur. Mensen in verschillende sectoren vertrouwen op onze expertise en ons advies. We werken voor overheid, wetenschap, onderwijs, lucht- en ruimtevaart- en auto-industrie in Noord-Europa en de Benelux. Daaronder bevinden zich vele prestigieuze en vooraanstaande organisaties. Vanuit locaties in Zweden, Nederland en België werken meer dan zestig toegewijde professionals aan oplossingen variërend van communicatie-testapparatuur en algemene test- en meetinstrumenten tot apparatuur voor data-acquisitie, logistieke automatisering, aangevuld met consultancy, training en turnkeyoplossingen.

We hebben een historie die teruggaat tot 1938. Onze oprichter, Cornelis Nicolaas Rood, was destijds een pionier in moderne elektronica. Onze mensen bevinden zich ook anno nu graag in de frontlinie van technologische ontwikkelingen. Op onze eigen manier leveren we zo een bijdrage aan belangrijke maatschappelijke vraagstukken. Bijvoorbeeld in energietransitie, quantum computing, medische technologie, de zelfrijdende auto, de auto op zonne-energie, de energie transitie en alle andere deeptech die bijdraagt aan de schonere en betere wereld van morgen.

Daarom letten we ook op onze eigen impact op het milieu en klimaat. Aangezien wij vooral een adviserende functie hebben is onze eigen milieu-footprint gering. Vanzelfsprekend zien we wel toe op een zo duurzaam mogelijke productie van de apparatuur die wij verkopen en zorgen we voor een maatschappelijk verantwoorde bedrijfsvoering. Al onze producten kopen we uitsluitend in bij gecertificeerde fabrikanten die werken met herleidbare en verantwoorde grondstoffen. Gebruikte apparatuur wordt kosteloos opgehaald en gerecycled.

Het zijn maar een paar voorbeelden om duidelijk te maken dat we hechten aan een langetermijnvisie op de wereld om ons heen. Want juist met een geschiedenis van meer dan tachtig jaar kun je goed vooruitkijken. Daarom blijven we ook vooroplopen. Onze brede en diepe technische kennis van test- en meetapparatuur, in combinatie met onze persoonlijke connectie met onze klanten, maken ons uniek in de markt. De CN Rood groep is uw degelijke en betrouwbare kennispartner voor test- en meetapparatuur!

-----

Dependable. Reliable. Knowledge Partner.

The CN Rood Group is a leader in knowledge and solutions in the field of test and measurement equipment. We distinguish ourselves with a personal and customer-oriented approach. Our customers often seek not a product but a solution, and we all have the drive to contribute to that solution. What we like doing best: continuously working on the latest developments in test and measurement equipment. Now, and in the future. Because that's where our passion lies: wanting to know exactly what is going on. That way, we can help our customers in the best possible way.

We think along, advise and guide our customers in making the right choice of test and measurement equipment. People in various sectors rely on our expertise and advice. We work for government, science, education, aerospace and automotive industries in Northern Europe and the Benelux. These include many prestigious and leading organisations. From locations in Sweden, the Netherlands and Belgium, more than sixty dedicated professionals work on solutions ranging from communication test equipment and general test and measurement instruments to data acquisition equipment, logistics automation, complemented by consultancy, training and turnkey solutions.

We have a history dating back to 1938. At the time, our founder, Cornelis Nicolaas Rood, was a pioneer in modern electronics. Even today, our people enjoy being at the forefront of technological developments. In our own way, we contribute to important social issues. For instance, in energy transition, quantum computing, medical technology, the self-driving car, the solar car, the energy transition and all other deep-tech that contributes to the cleaner and better world of tomorrow.

Therefore, we also pay attention to our own impact on the environment and climate. Since we mainly have an advisory function, our own environmental footprint is small. Naturally, we do see to it that the equipment we sell is produced as sustainably as possible and we ensure socially responsible business practices. We purchase all our products exclusively from certified manufacturers working with traceable and responsible raw materials. Used equipment is collected and recycled free of charge.

These are just a few examples to make it clear that we value a long-term view of the world around us. Because it is precisely with a history of more than eighty years that it is easy to look ahead. That's why we stay ahead. Our broad and deep technical knowledge of test and measurement equipment, combined with our personal connection with our customers, make us unique in the market. The CN Rood group is your solid and reliable knowledge partner for test and measurement equipment!

Privacy statement
Disclaimer
Cookies