Holy Stone high voltage products are designed and manufactured to meet the general requirements of international standards. HolyStone is pleased to announce the release two new product ranges, these are the HCT Series and HCP Series. The HCT and the HCP Multilayer Ceramic Chip Capacitors series are ideally suited for LED driver, lighting, power adapter and USB charger applications and other applications where effective capacitance at working voltage is critical to circuit design.
HCT Series
The HCT Series(X7T dielectric)is ideally suited in applications where the capacitance at working voltage is critical to the circuit design. It has extremely good DC bias characteristics compared to X7R/X5R, resulting in a lower initial capacitance requirement. In addition, the HolyStone X7T dielectric has very low acoustic noise characteristics. Acoustic noise can be an issue in many applications where an AC signal is applied to the capacitor resulting in an audible ringing. This dielectric material is an ideal solution to the problem of acoustic noise.
Highlights HCT Series:
Available in rated voltages of 250Vdc, 450Vdc and 630Vdc
Good DC bias characteristics
Low Acoustic noise
Specifications:
|
Operation Temperature |
-55C to +125C |
|
Rated Voltage |
250Vdc ~630Vdc |
|
Temperature Coefficient |
+22/-33% -55C to +125C |
|
Capacitance Range |
10nF~0.47uF ,other capacitance values available upon request |
|
Dissipation Factor |
2.5% max. at 1KHz 25C |
|
Insulation Resistance |
10G? or 500 M??F min. whichever is smaller |
|
Dielectric Withstanding |
1.5xWVDC for 5 sec |
|
Capacitance Tolerance |
10%, 20% |
Download datasheet for more details
HCP Series Multilayer Ceramic Chip Capacitors
The HCP series(X7P dielectric)has all the benefits of the HCT series but with the added advantage of increased thermal stability over the working temperature range. X7P dielectric has a 10% capacitance change from -55C to +125C and combined with its low DC bias makes these parts very stable in applications where minimal capacitance change is required over temperature and applied DC voltage. Both the HCT and HCP series are available with Polymer Termination (SuperTerm) andArc Preventioncoating.
Highlights HCP Series:
Thermal stability over the full working temperature range of -55C to +125C of 10%
Available in rated voltages of 250Vdc, 400Vdc, 450Vdc and 630Vdc
Good DC bias characteristics
Low Acoustic noise
Specifications:
|
Operation Temperature |
-55C to +125C |
|
Rated Voltage |
250Vdc ~630Vdc |
|
Temperature Coefficient |
10% -55C to +125C |
|
Capacitance Range |
10nF~0.68uF ,other capacitance values available upon request |
|
Dissipation Factor |
0.8% max. at 1KHz 25C |
|
Insulation Resistance |
10G? or 500 M??F min. whichever is smaller |
|
Dielectric Withstanding |
1.5xWVDC for 5 sec |
|
Capacitance Tolerance |
5%, 10%, 20% |
Download datasheet for more details
For more information, pleasecontact Nijkerk Electronics.
