Winstar 5? PCAP IPS TFT for HDMI Signal
WinstarWF50FSYFGDHGV is an IPS 5 inch High Brightness 800480 TFT-LCD module with Capacitive Touch Panel (PCAP). WF50FSYFGDHGV comes with a control board which only supports Raspberry PI system HDMI Signal interface (only DVI). There is a 40-pin GPIO connector on the control board which is designed to make Raspberry Pi usage easy. The control board on module is featured with four mounting holes which is an easy method for customers to fix modules on their applications. WF50FSYFGDHGV adopts an IPS panel which has a wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical value). The brightness is 750 nits (typical value); the Capacitive Touch Panel is built in with ILI2130 IC which supports USB interface. Winstar also offers Resistive Touch Panels (RTP) for WF50F HDMI signal series, available part number WF50FSYFGDHTV (RTP touch screen).
The supply voltage for LCM (VDD) of WF50FSYFGDHGV is 5V, glare surface glass, aspect ratio 5:3, and contrast ratio 1,000:1 (typical value). It can be operated at temperatures from -20? to +70? and storage temperatures from -30? to +80?.
| WF50FSYFGDHGV | Dimension |
| Size | 5 inch |
| Dot Matrix | 800 3(RGB) 480 |
| Module dimension | 120.7 x 75.8 x 23.2 (Max) mm |
| Active area | 108.0 x 64.8 mm |
| Pixel pitch | 0.135 x 0.135 mm |
| LCD type | TFT, Normally Black, Transmissive |
| View Direction | 80/80/80/80 |
| Aspect Ratio | 05:03 |
| Backlight Type | LED, Normally White |
| Controller IC | TFP401 |
| Interface | HDMI (only for DVI) |
| CTP IC | ILI2130 or Equivalent |
| CTP FW Version | 0x07.0x00.0x00.0x00.0xA1.0x25.0x50.0x00 |
| CTP Resolution | 16384*16384 |
| CTP Interface | USB |
| Touch Panel | With CTP (PCAP) |
| Surface | Glare |
For more information, pleasecontact Nijkerk Electronics.
