Winstar WF70MTABHLRN0 is a 7 inch IPS M Series TFT-LCD display, made of resolution 1024Ś600 pixels. The M Series TFT is an all in one system which supports two kinds of user interfaces; the UART and SPI interface. WF70MTABHLRN0 module is featured with IPS panel which is having the advantage of wider viewing angle of Left:85 / Right:85 / Up:85 / Down:85 degree (typical), contrast ratio 800:1 (typical value), high brightness 600 nits (typical value), anti-glare surface panel, aspect Ratio 16:9. The power voltage of LCM is 5V (1.5A at least). It can be operating at temperatures from -10? to +70? and storage temperatures from -30? to +80?. This 7? IPS M series have Resistive Touch Panel and Projected Capacitive Touch Panel for options.
WF70MTABHLRN0 module is built-in with microcontroller STM32F429 (CPU Frequency 180MHZ) on control board. Winstar designed an UI (user interface). By using Winstar TFT UI editing program and firmware, users can accelerate the project development. More detailed information of this IPS 7? M Series TFT series, please find in the following content.
|
WF70MTABHLRN0 |
Dimension |
|
Size |
7 inch |
|
Dot Matrix |
1024 x RGB x 600 (TFT) |
|
Module dimension |
170.3(W) x 103.8(H) x 20.15(D) mm |
|
Active area |
154.2144 x 85.92 mm |
|
Dot pitch |
0.1506 x 0.1432 mm |
|
LCD type |
TFT, Normally Black, Transmissive |
|
Viewing Angle |
85/85/85/85 |
|
Aspect Ratio |
16:9 |
|
Backlight Type |
LED, Normally White |
|
Interface |
Uart 19200 Baud rate/SPI |
|
Touch Panel |
PCAP /RTP options |
|
Surface |
Anti-Glare |
|
Operating mode |
Slave mode |
|
Flash Memory Size |
32M bits (4M Byte) |
|
SD card format |
FAT, exFAT |
|
Control IC |
STM32F429 |
|
Power |
5V, 1.5A(at least) |
For more information, please contact Nijkerk Electronics.
