The series provides a broad DC input voltage range, catering to standard 48V, 72V, 96V, and 110V railway battery requirements as outlined in EN50155. Its high-efficiency design minimises heat output, yielding a wide operating temperature range of -40°C to +70°C (+85°C for 10 minutes) with minimal cooling requirement. It offers standard output voltages of 12V, 24V, 36V, and 48V, all...
New 240W dual-output 12S24S switch-mode power supply, blending advanced technology and exceptional design for superior energy solutions. The AQF240 12S24S meets ESD testing standards up to Air 27KV and incorporates a dual-layer PCB board for enhanced durability. It's a cost-effective solution, replacing two power supplies and standing out with efficient operation, enclosed type design, complete power protection, and space-saving advantages....
COMPACT HI-CURRENT HI-PERFORMANCE DC FILTER FOR EV CHARGERS
The XL180 is not only one of the smallest 180 Watt power supplies on the market, it is also available in a choice of three different packages to suit diverse application requirements; XLO Open-Frame models, XLE Enclosed models and XLD DIN Rail models.
Astrodyne TDI's PowerBridge™ AC uninterruptable power supply provides power backup for critical applications. In the event of a power outage, the PowerBridge™ allows users to bridge the power gap of a system while the facility emergency power ramps up. This power solution can provide the necessary power for medical devices and imaging during surgical procedures to ensure successful results. The...
The EDP400 series is the first standard line of power adapters above 60W that achieves CF leakage and Class B EMC with only a Class II input. This line of power adapters operates over the input voltage range of 90 to 264 VAC at 50-60Hz frequency and produces 400 Watts of regulated DC output power. The EDP400 series is safety...
Astrodyne TDI’s ASX0550-xx-20 is a medical grade multi-output low voltage power system in a 1U rack mount configuration that is Class I input, with 20 electronically controlled and monitored 2.2A outputs (combined max. 550W). All outputs are 2 MOPP isolation and BF leakage current protection. This power supply can operate over the input voltage range of 90 to 264 VAC...
New range of high-performance EMI/EMC filters for fast and ultra-fast DC chargers. The new RP695H DC EMI filters combine high performance and compact factors. These high-performance EMI/EMC filters are designed to improve cost and shorten the time-to-market for DC charger OEM. The RP695H series is a high-performance, dual-stage DC EMI/EMC solution that operates up to 1500 VDC. For performance, cost,...
The F-series of Facility/Shielded Room EMI Filters include current ratings from 20 A to 2500 A, with operating voltages between 277/480 VAC and 345/600 VAC, to support a variety of applications. The F Series filter designs are agency approved and comply with the requirements of MIL-PRF-15733 and MIL-STD-810. Main Features: Attenuation (insertion loss) is 100dB @14KHz to 10GHz measured in...
Reduce Power System Complexity and Time to Market with the World Leader in Liquid Cooled DC Power Solutions. Our multiple Liquid Cooled Power Supply solutions offer a wide range of models with fully programmable outputs. Multiple control modes provide ultimate application flexibility and increased system performance. These advanced liquid-cooled AC/DC and DC/DC power solutions include power modules that offer up...
The PowerBridge™ AC uninterruptible power solution is now available with 120V and 220V AC output power to support a variety of applications.
Astrodyne TDI's new ASM30 series of convection cooled power supplies deliver up to 30 watts of regulated DC output for a variety of applications including healthcare, industrial equipment, and commercial electronics.
medical-grade programable power supply
As industrial automation becomes more digitized, the susceptibility of equipment to electromagnetic interference (EMI) increases. Filtering and/or shielding these devices against EMI is vital to ensure uninterrupted operation and intended output. This is especially critical because due to interference, controls can malfunction, resulting in faulty output. This can cause serious accidents and/or line-down conditions resulting in loss of productivity.
New electrifying EMI/EMC filter solution for ev-chargers.
ProTek Devices’ PLR0621 TVS array is suited for circuit protection in computing applications.
FSP2000-20HM is a redundant power supply module base on CRPS standard. The power supply comes to offer the total power capacity up to 2000 Watts,
Compliant to industry standard IEC60601-1 with 2 MOPP (means of patient protection) and BF Leakage Current as well as UL62368-1, HermesFlex™ represents the latest evolution of Astrodyne TDI’s industry-leading medical grade power solutions. HermesFlex™ provides two isolation barriers that are required to ensure that the applied part is isolated from the ground eliminating the need for bulky isolation transformers in devices that...
The new DIN-rail mount EMI/EMC filter solution by Astrodyne TDI was developed with space, weight, and efficiency in mind. The design features an ultra-slim plastic enclosure with a user-friendly spring cage connection to simplify installation and minimize space requirements. The 089 Series is available with a metal oxide varistor (MOV) to protect against voltage spikes, while the 089H Series can...
Alcom Electronics heeft een ververste lijnkaart! Met trots vertegenwoordigen we de fabrikanten op onze lijnkaart met wie we een hecht en langdurig partnerschap hebben. Met onze door de fabrikant gecertificeerde verkopers en technische applicatie engineers bieden wij u een betrouwbare basis voor uw keuze voor Alcom. Alcom Electronics zet zich in om haar klanten te voorzien van geavanceerde componenten, modules,...
Eaton’s Multilayer Varistors provide highly reliable protection for electronics against electrostatic discharge (ESD) and higher power transients. They are ideal for the protection of I/O interfaces as well as components and circuits sensitive to ESD transients occurring on power supplies, control and signal lines. Chip MLVs are offered from working voltages of 5.5 Vdc up to 200 Vdc and capacitances...
Protek introduced a new circuit protection diode to shield CAN Bus and other automotive subsystem designs from electrostatic discharge and other electrical fast transient damage. The ESD protection level is rated at > 25 kilovolts. The PESD2402 is designed to protect two signal data lines from impairment arising from ESD and other applied transients. The diode operates at 24V with...
In the broadest terms, EMI and RFI amount to interferences of an electrical or magnetic nature that can degrade how well a piece of electronic equipment performs or the quality of the signal it receives — which is responsible for its nickname “noise.” Why to use an EMI/RFI FilterOff-the-shelf versus custom EMI filters Datasheet Find out more about Astrodyne products
Schurter and Alcom will be pleased to work with you to find the optimal EMC solution for your specific application. On your behalf, we conduct EMC tests, provide interference suppression for your equipment, fabricate specific product samples for you and support your product life cycle from development all the way to series production. In addition to customer-specific products, you can...
Alcom offers a 66page short-form catalog, designed for quick and easy access to all of our parts. Includes electrical characteristics, circuit diagram of each product series and selection chart per application Select the right products using the matrix covering Communication, Automotive, Industrial & Military/Aerospace Applications Find out more about Protek Devices
RP359 3-Phase Delta Compact EMI Filters are multi-stage power line filters available from 150A to 2500A current rating. These 3-phase high current EMI filters offer 50/60Hz operating frequency and 520VAC (maximum) operating voltage. The RP359 3-phase Delta compact multi-stage high current EMI power line filters are RoHS compliant. These RP359 EMI filters are suitable for industrial and commercial environments. 50/60Hz...
Every printed circuit board (PCB) should be able to operate without disruption due to interference from other devices and without causing interference. To accomplish this, PCBs need to have strong electromagnetic compatibility (EMC) built-in from the ground up. EMC is what keeps our devices from constantly interfering with each other. The high amount of wireless devices in use today —...
AEC-Q101-qualified TVS arrays for circuit protection in automotive, aerospace, intelligent control systems, consumer electronics, and telecommunications. The new PAM37SDxxAL/CAL series is available in multiple voltages.The TVS components are compatible with IEC standards 61000-4-2 (ESD): air 15kV, contact 8kV, 61000-4-4 (EFT): 40A, 5/50ns, and with 61000-4-5 (surge): 8/20 microsecond waveform. They also deliver 400W peak pulse power per line (typical =...
High Voltage / Current DC Filters are power line filters available from 25A to 2500A current ratings. The RP692 high voltage/current DC chassis mount filters provide 1200VDC (maximum) operating voltage. These power line filters are RoHS compliant and suitable for inverter applications. 1200VDC maximum operating voltage4700VDC Hipot rating50/50O typical insertion loss dB Datasheet Find out more about Astrodyne products
MINMAX is proud to announce the new MDW10 series of 10W Isolated/Regulated DC-DC Converters with wide input ranges in the compact 16 pin DIP package measuring only 0.94×0.54×0.31”, offering a very high power density up to 65W/in3. This level of integration offers system designers the opportunity to reduce overall PCB layout area or add more features into existing PCB profiles....
ProTek introduced two automotive circuit protection devices that are AEC-Q101 qualified to guard against electrostatic discharge and electrical fast transients in critical automotive systems.The PAM1IVN27 and PAM2IVN24 devices are ideal for CANBus, LINBus, FlexRay, and SENT in-vehicle sub-systems. Both new devices are also compatible with IEC standards 61000-4-2 (ESD): air ±30kV, contact ±30kV; with 61000-4-4 (EFT); and with 61000-4-5 (surge):...
RP415 3-Phase WYE Single Stage Filters are power line filters available in 8A to 160A current ratings. These RP415 power line filters are compact 3-phase WYE single stage to 160A chassis mount filters. The RP415 filters offer 480VAC (maximum) operating voltage, 50/60Hz operating frequency, and are RoHS compliant. Typical applications include 3-phase industrial drives, inverters, controllers, frequency converters, industrial power...
The MINMAX MKWI10C series is a new range of high performance DC-DC converters featuring a wide 4:1 input range in a chassis-mount package with terminal strip connections and optional DIN-Rail mounting offer system designers the opportunity to eliminate the power board request in the fieldapplication.Further features including high efficiency 86%; wide operating temp. range by -40? to +92.5? ; I/O...
The PESD3V3 is a double ESD protection diode in a SOT-23 package configuration. The device is designed to protect communications application from the effects of electrostatic discharge (ESD) and electrical fast transients (EFT). Features:Compatible with IEC 61000-4-2 (ESD): Air ±30kV, Contact ±30kVCompatible with IEC 61000-4-4 (EFT)Compatible with IEC 61000-4-5 (Surge): 25A400 Watts Peak Pulse Power per Line(tp = 8/20µs)Protects Two...
Compact Dual Stage Filters are single phase power line filters available in 3A, 6A, and 16A current ratings. These RP210 power line filters are a dual stage to 16A chassis mount filters. The RP210 filters offer 120/250VAC (maximum) operating voltage and 50/60Hz operating frequency, and are RoHS compliant. These RP210 power line filters are ideal for general purpose applications. Single...
The FMAB HV series of EMI filters for 1-phase systems. The new filter is suitable for applications requiring ac voltages up to 277V, such as 1-phase of the 3-phase 480Vac/277Vac wye system, typically used for lighting applications in North America. It is also rated for 400Vdc, a power infrastructure increasingly common in data centers and related equipment according to IEC...
Compact Single Stage Filters are single phase power line filters available in 3A, 6A, and 10A current ratings. The RP100 filters offer 120/250VAC (maximum) operating voltage and 50/60Hz operating frequency. The power line filters are medical grade and RoHS compliant. These RP100 power line filters are ideal for medical and general purpose applications. Single phase power line filtersMedical grade filters...
New circuit protection diode suited for automotive applications, such as Controller Area Network (CAN) bus lines. The new PAM3CAN diode is qualified by the Automotive Electronics Council (AEC). The PAM3CAN is designed to protect two automotive CAN bus lines from the damaging effects of electrostatic discharge (ESD) and other electrical fast transients (EFT). In addition to being AEC-qualified, the new...
FMAD NEO is a single-stage EMC filter series for 3-phase systems with a neutral line. Especially compact with high performance, the new filter series is suited for use in today’s more portable industrial machines. A wide temperature range further extends its capabilities for use in demanding climatic applications.The FMAD NEO is especially suited for applications with high electro-magnetic loads, such...
Use our cross reference chart to quickly find your part. Contact us to cross offer manufacturers such as Tyco and Corcom. Datasheet Find out more about Astrodyne products
New ultra-low-capacitance surge protection component for circuit protection in applications such as automotive infotainment systems, industrial cameras, Thunderbolt and more. The very low capacitance for the new PTB05-ULC is 0.15pF max (I/O to GND).The PTB05-ULC is designed to protect high speed data lines – up to eight – from electrostatic discharges (ESD) and electrical over-stress (EOS). It is compatible with...
Schurter expands its successful range of current-compensated chokes with a series for 4-wire high-current applications on printed circuit boards. The new DKIH-4 series is available for three phase applications with neutral line at rated currents from 10 A to 40 A. Due to the open design, the chokes are particularly compact and light.Like most electronic assemblies, the power section is...
New steering diode / transient voltage suppressor arrays for electrical circuit protection in various computing interfaces, such as Gigabit Ethernet, HDMI and USB. The two new parts, in conjunction with passive components integrated into a TVS / filter network, can also be used for electromagnetic / radio frequency interference protection. The new components are the PLR0504PLCN, with a 5.0 volt...
Single-phase EMI Filters suppress the electrical noise of a wide range of appliances and equipment. At Astrodyne TDI, we offer off-the-shelf Single-Phase Filters available from 1A to 150A, as well as custom current ratings of up to 2500A. Many industries use Single-Phase EMI Filters in their products. Telecommunication, Commercial, Industrial, Medical and Fitness Equipment all make use of Single-Phase EMI...
Today’s electronic equipment is designed to deliver high performance in a compact size. Often this causes problems affecting the equipment itself or other nearby devices due to the inherent electro-magnetic interferences being generated in and between the different systems. To meet these EMC challenges, high performance power entry modules must also keep pace, and such is the case with the...
New series of ultra-low capacitance (0.6pF typical) transient voltage suppressor arrays for overvoltage circuit protection in smartphones and other portable electronics. The new series is also suited for Ethernet, USB interface and wireless systems.ProTek Devices’ GBLCxxCIDFN series of TVS arrays are available in a bidirectional configuration. They are rated at 250 watts peak pulse power per line for an 8/20...
A Three-Phase EMI Filter reduces Electromagnetic Interference and helps you maintain compliance with emission standards. At Astrodyne TDI, you’ll find a range of EMI Filters available for both Delta and WYE configurations.Choose from a range of voltages — including 480VAC, 520VAC and 600VAC — and current ratings up to 2500A. We offer Single, Dual and Multi-Stage designs, as well as...
The causes of EMC interference can be of various kinds. Therefore, standard filters are not always the simplest and best solution. SCHURTER now offers a so-called “Evaluation Board” with which an almost ideal filter for the specific incident can be built within a short time in an iterative process.Every developer of an electrical or electronic device is faced with the...
