Würth Elektronik now offers a solution for phase control of AC loads, the new WL-OCTR optocouplers, a safe alternative to mechanical relays. The TRIAC optocouplers are particularly suitable for use in lamp dimming functions and AC motor drivers in household appliances. They can also be used as drivers for high-current TRIACs.

Lees meer

In addition to Würth Elektronik’s five existing package sizes of WE-XHMI SMT power inductors there are now eight new packages. These compact yet extremely efficient inductors feature high current capacity up to 56 A saturation current and the ability to handle high transient current spikes. This makes them particularly suitable for use as DC/DC converters in power supplies, point-of-load converters...

Lees meer

Würth Elektronik has a series of connectors checked by Groupe SGS France.

Lees meer

Würth Elektronik offers sulfur-resilient resistors Black Silver: Not Only an Aesthetic Problem Waldenburg (Germany), April 4, 2024 – WRIS-RSKS Anti-Sulfur Resistors is the name under which Würth Elektronik presents its new family of more than 500 resistors whose outstanding feature is their resilience to sulfur. The range is aimed at manufacturers of durable electronics for applications susceptible to exposure from...

Lees meer

Würth Elektronik now offers WL-ICLED, a new series of RGB LEDs with integrated controller (IC). The components, controllable as pixels, combine a red, green and blue LED with a programmable contoller IC. The intelligent LEDs, available in four designs, are individually controllable in their pixel color and brightness levels from 0 to 100 percent.

Lees meer

Würth Elektronik expands its REDEXPERT online simulation tool with the MagI³C Power Module Designer Power module design-in made easy

Lees meer

Application Note for using Würth Elektronik optocouplers in flyback converters Design of the Compensation Circuit for a Flyback Converter Waldenburg (Germany), February 13, 2024 – Würth Elektronik has published its new Application Note “Compensating the feedback loop of a current-controlled flyback converter with optocoupler” (http://www.we-online.com/ANP113). The guide is aimed at developers looking to use a DC/DC flyback converter to achieve...

Lees meer

Würth Elektronik introduces its series of MEMS humidity sensor capacitors Small, Economical and Very Precise Waldenburg (Germany), January 24, 2024 – Würth Elektronik is launching a very compact, cost-effective digital humidity sensor in the WSEN-HIDS series. The MEMS (Micro-Electro-Mechanical System) sensor measures with a precision of ±1.8% RH in the 20 - 80 percent relative humidity range. The DFN (Dual...

Lees meer

Würth Elektronik expands the capabilities of its online design platform REDEXPERT, REDEXPERT accounts for DC bias losses in inductors

Lees meer

Würth Elektronik introduces its new product family: SMT digital isolators with and without integrated power supply. The components are used for galvanic isolation to transmit digital signals thus avoiding differences in potential and protecting people and sensitive circuits from high voltages.

Lees meer

Würth Elektronik expands its program of differential pressure sensors High-precision MEMS Pressure Sensors Now Also for 3.3 V Supply

Lees meer

With the establishment of Würth Elektronik Danmark A/S, customers from Denmark, Greenland and the Faroe Islands now have a direct point of contact for their electronic and electromechanical component needs. Previously, these markets were also served by the Swedish subsidiary.

Lees meer

Würth Elektronik is extending its WR-TBL series by screwless push-in connectors in the 3.5mm and 3.81mm pitches

Lees meer

Würth Elektronik opens subsidiary in New Zealand

Lees meer

Würth Elektronik is also focusing on IoT applications with its portfolio of MEMS sensors. Zephyr OS – the microcontroller operating system from the Linux Foundation now includes the corresponding drivers. The new application note ANR034 (www.we-online.com/ANR034) from Würth Elektronik provides instructions on how to integrate a sensor into the terminal device software in just a few steps.

Lees meer

Würth Elektronik introduces its WR-BTB family of connectors, now made of guaranteed halogen-free plastic.

Lees meer

Würth Elektronik presents new additions to the WE-AGDT series, with interwinding capacitance lower than 1 picofarad, more topologies and higher output voltage options

Lees meer

Würth Elektronik has expanded its collection of practical information to support electronics developers with the new AppNote ANO007 “Understanding Phototransistor Optocouplers” (www.we-online.com/ANO007)

Lees meer

Würth Elektronik is expanding its USB-C range with a 24-pin fully-configured horizontal receptacle for SMT assembly.

Lees meer

Würth Elektronik is proud to present its RD022 reference design “GB-PoE+ Ethernet USB adapter,” freely available at www.we-online.de/RD022.

Lees meer

The Application Guide in the Würth Elektronik online catalog has been expanded and is now the Application & Industry Guide: the fields of household appliances, power tools and e-mobility industries are now represented. More are still to come. The manufacturer of electronic and electromechanical components is pushing ahead with its concept of using typical applications to help developers implement their...

Lees meer

With its new Calypso IoT Design Kit, Würth Elektronik is proud to present an evaluation kit with pre-installed firmware, which enables the simple creation and evaluation of secure end-to-end IoT solutions using Microsoft’s Azure IoT Central. The design kit offers a robust hardware platform for rapid prototyping. The FeatherWing development board from Wurth Elektronik combines sensors, power modules and wireless...

Lees meer

Wurth Electronics Midcom Inc, German Branch, with its EU headquarters in Munich, is part of the Würth Elektronik eiSos Group and specializes in transformers for switched-mode power supplies and customer-specific inductive components. The company was awarded the eponymous seal of approval as a very attractive employer by the independent organization Great Place to Work®. In an internationally established and proven...

Lees meer

Cost-effective and Convenient Acceptance of Wireless Chip Cards

Lees meer

The series is designed for elevated temperatures, up to 155°C, and is capable of handling operating voltages up to 1000VDC. With multiple sizes available, inductances ranging from 118-720µH, and rated currents up to 48A, this new series is a fit for active power factor correction, industrial AC/DC, solar inverters, and a variety of other applications. In addition, this series includes...

Lees meer

Würth Elektronik component libraries on GitHub

Lees meer

Würth Elektronik has expanded its range of coaxial cables and connectors to include comprehensive portfolio of N type cable connectors to satisfy MIL-STD-348 requirements with 50 ? impedance. Jacks for connecting to the application PCB are available in straight and angled THT versions, or as 4-hole flanged panel connectors with round post or solder cup. Besides pre-assembled cables, individual cable...

Lees meer

Würth Elektronik presents WE-HEPC, its smallest NiZn-ferrite based self-shielded power inductor to date.

Lees meer

Würth Elektronik offers WR-CIRCM12 M12-A circular connectors Well-protected Connections Waldenburg (Germany), April 20, 2023 – Würth Elektronik now offers a wide product portfolio of A-coded M12 circular connectors (DIN EN 61076-2-101). The high-quality female and male connectors with screw mating for panel mounting and cable attachment are suitable for use in harsh environments with moisture, dust and vibration. WR-CIRCM12 is...

Lees meer

Würth Elektronik opens High-tech Innovation Center

Lees meer

Würth Elektronik presents a new series of film capacitors specially designed for DC-Link applications. The WCAP-FTDB series components can be used in the voltage range from 500 to 1200 V and are characterized by high ripple current capability. This makes them particularly attractive for use in AC/DC and DC/DC converters for charging systems and power electronics in e-mobility or in...

Lees meer

The WS-TOTV toggle switch family from Würth Elektronik is suitable for switching views on measuring devices or functions on machines, for example.

Lees meer

Würth Elektronik presents Accelerometer and Gyroscope in One

Lees meer

Würth Elektronik introduces its new family of safety capacitors for interference suppression in mains filters

Lees meer

Würth Elektronik and KDPOF technology partnership

Lees meer

Waldenburg (Germany), March 1, 2023 – The SKEDD connector family featuring patented Würth Elektronik technology has a new arrival: REDFIT WR-WSP Crimp SKEDD. The direct connectors are available for solder-free and tool-free assembly with up to five pins and in five different color codings. They feature current capacity up to 16 A, a 400 V rated voltage, and an operating...

Lees meer

Würth Elektronik partners with Crypto Quantique for IoT Security Waldenburg (Germany), London (UK), January 13, 2023 – Würth Elektronik has signed a partnership agreement with Crypto Quantique. Collaboration with the specialist in quantum-based cyber security in the Internet of Things (IoT) enhances security for Würth Elektronik’s wireless modules. Würth Elektronik boasts a broad portfolio of modules for wireless communication and...

Lees meer

Würth Elektronik has expanded its WL-OCPT optocoupler product family with the DIP-8 design. Two-channel optocoupler phototransistors with eight pins are now available. This design contains two circuits inside a single component constructed from two input LEDs and two output phototransistors, therefore two separate circuits can be controlled with a single component. WL-OCPT features a stable current transfer ratio (CTR) over...

Lees meer

Würth Elektronik presents WE-XHMA SMD Power Inductor High current inductor for automotive applications

Lees meer

Electromechanics catalog 2023 from Würth Elektronik Stay Connected Waldenburg (Germany), January 19, 2023 – Würth Elektronik now presents its “Electromechanical Components 2023” catalog to download. The catalog contains 65 pages with innovations from the areas of connection and assembly technology as well as switches and buttons. The manufacturer dedicates a chapter to the REDCUBE high-power contacts. Thanks to press-fit technology,...

Lees meer

Modern Appearance of the Würth Elektronik Group Waldenburg (Germany), January 12, 2023—Würth Elektronik has revised and redesigned its information and communication offering. The joint web presence of the Würth Elektronik companies can be found at www.we-online.com. On a modern website, the relaunch combines various product and service offerings of Würth Elektronik eiSos, Würth Elektronik Circuit Board Technology and Würth Elektronik...

Lees meer

Munich (Germany), December 21, 2022 – Moving into the future: The HIC is the new innovation center of the Würth Elektronik Group of Companies. The location in Freiham offers the best conditions for driving forward research and development for trend-setting solutions. Würth Elektronik is relocating its Munich site from Garching to Freiham. With the Hightech Innovation Center Munich (HIC), a...

Lees meer

Würth Elektronik introduces its WE-MCI multilayer ceramic inductors Automotive-Qualified High Frequency Inductors with Tight Tolerances Waldenburg (Germany), December 8, 2022—Würth Elektronik now offers WE-MCI — a series of high-frequency inductors boasting a wide range of values: The 0402 package covers inductance values from 1 to 270 nH, while the WE-MCIs in a 0603 package range from 1 to 470 nH....

Lees meer

Würth Elektronik presents reference design for its Gigabit Ethernet front end EMC Aspects of Gigabit Ethernet Interfaces Waldenburg (Germany), December 2, 2022 – Würth Elektronik has published its RD016 reference design (https://www.we-online.com/RD016) and the corresponding application note ANP116 (https://www.we-online.com/ANP116). With this, the manufacturer of electronic and electromechanical components provides valuable information for the development of EMC-compliant Gigabit Ethernet applications. Developers...

Lees meer

another line of retrofittable interference suppression solutions with AEC-Q200 qualification, as required for the automotive industry

Lees meer

An Isolated Power Module in a MicroModule Package

Lees meer

Würth Elektronik presents technically mature circuit templates for developers in its reference designs. Release RD002 is currently available for free download: 6 W unipolar isolated auxiliary supply for SiC MOSFETs and IGBT gate drivers. It explains the setup of a 27 x 14 x 14 mm small board with adjustable output voltage.

Lees meer

Würth Elektronik extends its range of coaxial products, High-frequency connectors: SMA, RPSMA, cables, and adapters

Lees meer

Würth Elektronik expands MagI³C-FISM family Next generation isolated power modules Waldenburg (Germany), August 17, 2022—The family of MagI³C FISM power modules has grown: Würth Elektronik presents the next generation of 1 W "Fixed Isolated SIP / SMT Modules". The outstanding features of the improved integrated voltage converters include continuous short-circuit protection (SCP) and increased isolation voltage. The nine new modules...

Lees meer

Würth Elektronik introduces its WS-TASV tact switches Extra Small, Robust and Washable Waldenburg (Germany), July 28, 2022—Würth Elektronik introduces another high-quality switch from the series of washable tact switches. The WS-TASV Tact Switch for SMT assembly is particularly space-saving with a footprint of just 4.1 x 2.8 mm and height of 1.9 mm. Three variants are available, color-coded according to...

Lees meer

Advancing technology - shaping the future Waldenburg (Germany), Delft, Hilversum (Netherlands), July 26, 2022—From July 18 to 24, the European Hyperloop Week took place in Delft and Hilversum, Netherlands (https://hyperloopweek.com). Würth Elektronik was involved in many ways: as a Gold Partner, jury member and speaker at the event, as well as a long-term technology partner of several teams. Unlike the...

Lees meer

UITNODIGING SEMINAR KABELS & CONNECTOREN – ins en outs van de juiste verbinding

Lees meer

The Rapid Energy Boost Waldenburg (Germany), July 20, 2022—Würth Elektronik introduces a new class of EDLC supercapacitors (Electrical Double Layer Capacitor) with snap-in terminals. WCAP-SISC – available with capacitance values of 100 F and 350 F – is the perfect solution for applications with high power and high energy requirements such as UPS or energy storage solutions. They can be...

Lees meer

Würth Elektronik expands its WE-MCA range of chip antennas

Lees meer

Würth Elektronik extends its MagI³C VDMM family with 36 V versions Power Module Meets the Requirements of the 24 V Industrial Voltage Network Waldenburg (Germany), July 5, 2022—A new generation of MagI³C VDMM power modules: The Variable Step Down MicroModules now cover all bus voltages from 3.3 V through 24 V Applications include Point-of-Load Converters or a direct connection to the 24V...

Lees meer

Würth Elektronik expands its portfolio in the field of FPC connectors, Reliable retention for ribbon cables and flexible PCBs: “WR-FPC 1.00 mm SMT ZIF Horizontal Back Locking Dual Contact” and “WR-FPC 0.50 mm SMT LIF Horizontal Dual Contact”.

Lees meer

Würth Elektronik steps up its commitment as an important training company in the Waldenburg region in Baden-Württemberg with its latest information offering: In podcasts, those interested discover the various training paths available at the manufacturer of electronic and electromechanical components and what they actually look like in practice. In the interviews, both a young talent and an employee from the...

Lees meer

Würth Elektronik introduces its new products

Lees meer

Vertical Farming A way out of the food crisis

Lees meer

Würth Elektronik presents Adrastea-I - its LTE-M and NB-IoT module Cellular Module for IoT Applications

Lees meer

MagI³C Power Module Suitable for 48 V Industrial Voltage Network

Lees meer

Würth Elektronik presents slim Bluetooth Low Energy radio module Proteus-e

Lees meer

Check out on this latest video on how Greatscott make use of our Horticulture LED and other components for the Future of Farming! Video: https://www.youtube.com/watch?v=4FryMPpJG6I You might want to do some experimenting yourself? Check out this landing page.

Lees meer

Würth Elektronik presents automotive bar core choke WE-CHSA Performance High current inductance with excellent saturation behavior

Lees meer

Design-in support for supercapacitor applications

Lees meer

New environmental protection campaign at Würth Elektronik, One Sample Order = One Tree Planted

Lees meer

High-quality Optoelectronics for Safe Circuit Isolation

Lees meer

Simulation platform REDEXPERT extended Waldenburg (Germany), January 13, 2022—REDEXPERT from Würth Elektronik is a precise simulation platform based on measured values that supports the component manufacturer's customers in selecting suitable components. Now, with the EMI Filter Designer, a user-friendly function for developing filters against electromagnetic interference has been added. In the first version of the tool, which will be continuously...

Lees meer

INVITATION! Lattice Semiconductor & Würth Elektronik Nederland / België / Luxemburg are combining forces to bring you the best knowhow about "How to design quick, efficient and cool FPGA's" Join us in person or join us digital!Sign up to see us in person ->https://lnkd.in/dSHBusWn Sign up to see us digital: -> https://lnkd.in/d4s8_MDGRunning into issues Implementing 10Gbit data using FPGA’s or...

Lees meer

Würth Elektronik Electronic Components New Product Brochure 2021/2022

Lees meer

Würth Elektronik significantly expands its thermal management product range Depending on the level of power loss and the situation with layout and assemblies, there is a wide variety of ways to dissipate heat. Insulating gaps between hot components and heat sinks, or a housing must be bridged or avoided. Würth Elektronik now provides new solutions for this task.

Lees meer

Waldenburg (Germany), 16 November 2021 – Opening up a new market is difficult, but the Korean team of Würth Elektronik was successful and reached a milestone; the foundation of Wurth Electronics Korea Ltd. The new national subsidiary of the manufacturer of electronic and electromechanical components is located in the Gangseo-gu district in the west of Seoul. By the end of...

Lees meer

Right Angled Connector for Important USB Application Waldenburg (Germany), 28 October 2021—Würth Elektronik now offers new WP-SMRA Surface mount solderable wire-to-board and board-to-board connections for 90° assembly on front panels, housings, PCBs or cable connections. WP-SMRAs are high-current contacts mainly intended for automated assembly within the REDCUBE series. The version with M2 screw thread is aimed towards a special application:...

Lees meer

Knowledge transfer via Watts Up Podcast Watertown (USA), 21 October 2021 –For over a decade, Würth Elektronik has been broadcasting educational materials through video services with their WEbinar program. Now, these online presentations, along with numerous Application Notes, blogs, interviews, and more are being offered through the new Würth Elektronik Watts Up Podcast. The Watts Up Podcast is distributed weekly...

Lees meer

Würth Elektronik offers SMT spacers and contact fingers from IATF 16949 certified production Electromechanical Components with a Stamp of Approval Waldenburg (Germany), 27 September 2021—Würth Elektronik presents two more products qualified for the automotive industry with its WE-SCFA series contact fingers and the WA-SMSA SMT spacers. The high-quality mechanical components for PCB assembly have already proven their worth in numerous...

Lees meer

Power Modules Replace L78x Linear Regulators Waldenburg (Germany), 15 September 2021—The range of MagI³C-FDSM power modules with 36 V input voltage has been expanded to include a version with 12 V output voltage. The power module in a SIP-3 package represents a cost-effective solution to meet the requirements for the real-world voltage transients of a 24 V industrial power architecture....

Lees meer

WE-AGDT: Highest efficiency transformer proves itself in Formula E Waldenburg (Germany), August 6, 2021 – Würth Elektronik has been a technology partner of the Audi Sport ABT Schaeffler team since the beginning of Formula E. Now, with the WE-AGDT transformer and the RD001 reference design, an important part of the power inverter gate driver system in the innovative Audi MGU05...

Lees meer

CTO Alexander Gerfer Addresses the Hyperloop Teams Waldenburg (Germany), July 28, 2021—A keynote by Alexander Gerfer, CTO at Würth Elektronik eiSos Group, on July 20 opened the first European Hyperloop Week Conference Week in Valencia. Alongside the Hyperloop Pod Competition, Würth Elektronik participated in numerous roundtable discussions with development teams and leaders from the Hyperloop scene throughout the week. Hyperloop...

Lees meer

Würth Elektronik expands its range of coaxial connectors with an Ultra-Miniature RF Coaxial Connector The Perfect Antenna Connection Waldenburg (Germany), July 22, 2021—WR-UMRF (Ultra-Miniature RF Coaxial Connector) is Würth Elektronik’s new, extremely compact high-frequency coaxial connector. The plug snaps into the jack to form a stable right-angled cable-to-board connection with a height of just 2.5 mm. This cost-effective connection technology...

Lees meer

Rugged Connection with Integrated Magnetics Waldenburg (Germany), July 15, 2021—Würth Elektronik is expanding its product portfolio with an industrial Ethernet M12 connector. The special feature of this sturdy M12 socket: The transformer and current-compensated choke are already integrated. With the manufacturer’s fitting screw connector, device developers and system builders can implement cabling that meets protection class IP67 used in harsh...

Lees meer

Fast, Economical and Robust Waldenburg (Germany), July 8, 2021—Würth Elektronik presents two product series of 7-segment displays: The SMT-mountable WL-S7DS and the THT-variant WL-T7DS. These rugged single-digit display can perform numbers easily. The new long-term standard products are available in three sizes, each with red or green LEDs (635 nm or 570 nm). Other emitted colors can be realized on...

Lees meer

More Power, More Possibilities Watertown (USA), 16 June 2021—Würth Elektronik expands its MID-POE Power over Ethernet transformer series to include PoE++. These SMT transformers are suitable for Flyback or Active Clamp Forward power supplies that comply with the IEEE 802.3bt (four pair power over Ethernet, 4PPoE, also known as PoE++) standard. The ten new transformers can provide an output power...

Lees meer

Flat cable coil in flat design with high current carrying capacity Waldenburg (Germany), 9 June 2021 – With WE-HCFT 2504, Würth Elektronik has added a model with an unusually low overall height to its tried and tested family of THT high-current inductors. The flat wire coil with MnZn core is only 4 mm high. With no standard competitors in the...

Lees meer

Slim LAN Connectors for Industrial 10 Gigabit Applications Waldenburg (Germany), 26 May 2021—Significantly more design freedom: Würth Elektronik has extended its WE-RJ45-10G product group with four new models. Three tab-down models join the existing Ethernet connectors with integrated transformer in tab-up design. These models have the recess for the connector tab on the underside. All four new RJ45 integrated transformer...

Lees meer

Chokes with Top Specs Waldenburg (Germany), 19 May 2021 - Würth Elektronik is expanding its portfolio of common mode chokes with two new models. The THT-mountable WE-FCLP for common-mode and differential-mode suppression, and the SMT data line and low-voltage common mode choke WE-CMDC. Both are available from stock without a minimum order quantity. The WE-FCLP has a compact design with...

Lees meer

Würth Elektronik Nederland is friends with Project MARCH with electronic and electromechanical components. With the help of our components, they can ensure that the exoskeleton is safe and reliable. More quality, more reliability, more safety in all sectors. Electronics are a key factor of the exoskeleton. Learn more about this great project: https://www.projectmarch.nl/

Lees meer

Waldenburg (Germany), May 11, 2021 - Würth Elektronik will support the first European Hyperloop Week as an exclusive partner. From July 19 to 25, 2021, a conference filled with round table discussions, keynotes, and the presentation of vehicles called "pods" will take place in Valencia. The highlight of the event will be the pod competition. Representatives from the manufacturer of...

Lees meer

IQXO-691: low voltage clock oscillators available from IQD Low voltage clock oscillators Waldenburg (Germany), 10 May 2021 – Today, billions of electronic devices are developed to suit consumer needs. As technology evolves, devices need to run at lower and lower voltages and this means that systems may need to have multiple supply rails. Because of this IQD, a subsidiary of...

Lees meer

Variant against Bottlenecks Waldenburg (Germany), 5 May 2021—Würth Elektronik introduces the Proteus-III-SPI Bluetooth Low Energy 5.1 module. This variant of the tried and tested Proteus-III uses an SPI instead of a UART interface. The new module, based on the Nordic Semiconductor nRF52840 chipset, exploits the possibilities of the Bluetooth Low Energy 5.1 standard—with significantly higher performance. With a payload of...

Lees meer

From the application to the right component Waldenburg (Germany), 27 April 2021 – To facilitate component selection, Würth Elektronik provides the new Web Application Guide at https://www.we-online.de/applicationguide/en. The easy-to-use tool offers the most common switching regulator and interface topologies - for example buck converters, CAN or Ethernet interfaces - and an overview of which components are required for them. From...

Lees meer

Best features in the smallest space Waldenburg (Germany), 22 April 2021 – With innovative improvements in its internal design, the latest model of WE-HCF-SMT high-current inductors from Würth Elektronik sets new standards in its class. WE-HCF in the 2010 design offers significantly better characteristics than previously available inductors in this size: inductance values up to 2 ?H and saturation currents...

Lees meer

eMobility partners in conversation Waldenburg (Germany), April 19, 2021 – "Racing for the Future" is the motto for motorsport fans and eMobility enthusiasts on Tuesday, April 27, 2021, starting at 2:00 pm. Drivers Lucas di Grassi and René Rast from the Formula E team Audi Sport ABT Schaeffler will be taking questions from the audience at Würth Elektronik. At 11:00...

Lees meer

Selection of Certified Hardware Waldenburg (Germany), 15 April 2021—Deutsche Telekom IoT GmbH has certified the first two products from Würth Elektronik and added them to its “IoT Digital Shelf”. Here, the Telekom subsidiary gathers selected products on the market to complete its own portfolio with certified hardware enabling it to offer its customers end-to-end solutions. Localization technologies recommended by Deutsche...

Lees meer

Würth Elektronik Thetis-I with Evaluation Kit Radio Module and Test Option for the Wirepas IoT Network Protocol Waldenburg (Germany), 8 April 2021—Würth Elektronik launches Thetis-I, a ready-to-use radio module for Wirepas mesh networks. Thetis-I is the perfect solution for IoT device manufacturers. Networks with technology from Wirepas, the Finnish software provider, are self-healing and freely scalable. Each device with a...

Lees meer

Würth Elektronik & Altium brings you a NEW partnership in WEbinars. Altium, a leading global developer of software for electronics design, and Würth Elektronik, one of the leading and best known PCB manufacturers, invite you to participate in a joint webinar "Standard PCB Stackups and Materials". Have you ever discussed the layer structure of your circuit board with your circuit...

Lees meer

Four days of concentrated electronics knowledge for developers Waldenburg (Germany), March 31, 2021 – In 2021, Würth Elektronik will again be holding its virtual trade conference WE meet @ digital days - this time over four days from April 26 to 29. From 8:00 a.m. to 6:00 p.m. each day, electronics specialist will present an extensive program with expert presentations...

Lees meer

We are pleased to invite you to a free technical Webinar tour of Texas Instruments, one of the world’s leading IC-manufacturers, and Würth Elektronik, one of the largest European manufacturers of inductive components. Because of the International character of the webinars, they will be held in English! After two successful webinars we are pleased to invite you for the last...

Lees meer

A team at the Technical University of Munich and Würth Elektronik designed a coil with superconducting wires to transmit power of more than 5 kW contactless. The wide range of conceivable applications includes autonomous industrial robots, medical equipment, vehicles and even aircraft. Read the full article: https://www.elektroniknet.de/international/transmit-kilowatts-contactless.184489.html

Lees meer

Accordion Design as an Ingenious Detail Waldenburg (Germany), 12 March 2021—Würth Elektronik is expanding its already extensive range of flexible cables. Under the product name WR-FFC (Flat Flexible Cable), the manufacturer of electronic and electromechanical components offers flexible flat ribbon cables in various designs. To allow even more flexibility in use, Würth Elektronik now offers pre-folded ribbon cables. Accordion-style folding...

Lees meer

WL-SIQW – High Efficiency Infrared Light Source Waldenburg (Germany), 3 March 2021—Würth Elektronik complements its infrared product range with the new WL-SIQW SMT Infrared QFN LED Waterclear product series. The LEDs in Quad Flat No Leads (QFN) format are available in 2720, 3535 and 3737 packages with different radiant intensities from 125 to 800 mW/sr and in 90°, 120° or...

Lees meer

Shielding Cabinets for High Frequency Applications Waldenburg (Germany), 25 February 2021—Würth Elektronik has added further WE-SHC series shielding cabinets to its product range: WE-SHC Seamless are the first cabinets of their kind for automated population, optimized for high frequency applications. They are completely enclosed with seamless corners making them particularly effective. The tin-plated steel plate cabinets are available in over...

Lees meer

IR Source for Environmental Recognition Waldenburg (Germany), 18 February 2021—Würth Elektronik launches its own infrared laser for the first time to extend its comprehensive portfolio of infrared emitters. The WL-VCSL Vertical Cavity Surface Emitting Laser scores with its high-quality materials, high efficiency of 35 percent and almost two Watts of radiant power. Designed to emit short, high-energy pulses, the new...

Lees meer

We are pleased to invite you to a free technical Webinar tour of Texas Instruments, one of the world’s leading IC-manufacturers, and Würth Elektronik, one of the largest European manufacturers of inductive components. Because of the international character of the webinars, they will be held in English! In total we have four webinars planned. The first one will take place...

Lees meer

Innovative drone project for medical care Waldenburg (Germany), 8 February 2021 – As a leading manufacturer of electronic and electromechanical components, Würth Elektronik actively promotes sustainable innovations, start-ups and young developers. In addition to providing components free of charge, the assistance includes, in particular, support from experienced electronics and design experts as well as the transfer of technical know-how. A...

Lees meer

Robust Clock Signal Generators Waldenburg (Germany), 3 February 2021—Würth Elektronik launches further WE-SPXO series quartz oscillators onto the market. The additions to the program include a new design with LVDS or LVPECL output signal plus 32.768 kHz oscillators. While the hermetically sealed oscillators were already outstandingly well specified for a wide range of industrial applications, the new arrivals are even...

Lees meer

High Quality Factor, High Rated Current, Huge Selection Waldenburg (Germany), 20 January 2021—Würth Elektronik has expanded its WE-KI product family with further ceramic inductor variants in 0603 and 0805 packages. Now the portfolio includes over 300 models in four sizes from 0402 to 1008, optionally with ±2 and ±5 per cent tolerance. With the new range of models, the available...

Lees meer

Certified Components for Automotive Electronics Waldenburg (Germany), 14 January 2021—Würth Elektronik has published a new catalog of AEC-Q200 certified components for automotive electronics. Product highlights include new ferrites, inductors and particularly robust electromechanical components. Design kits from many product groups are available for developers—as sample sets with free refill service. With WE-TEMA, Würth Elektronik offers an innovative series of ferrites...

Lees meer

Best transmission despite long cable Waldenburg (Germany) 12 January 2021 – With the SHDSL standard, data can be transmitted over extremely long copper cables. This makes this technology the first choice in applications where Power over Ethernet and DSL technologies like G.FAST, VDSL are not possible. With its SHDSL Evaluation Kit Würth Elektronik now offers developers the possibility to test...

Lees meer

Würth Elektronik heeft voor de eerste maanden van 2021 weer een mooi gratis webinar programma voor u:Voor meer informatie over de topics en om in te schrijven surf naar: www.we-online.com/webinarsnl 19-01: Extreem hoge Speed Data Line Chokes voor IoT toepassingen 26-01: Creepage en Clearance09-02: EMC filters: welke componenten en filter design02-03: ZIF/LIF interconnectie09-03: Power Inductor selectie voor een DC/DC converter16-03:...

Lees meer

Radio and Sensors Modules for IoT and Industrial Applications Waldenburg (Germany), 16 December 2020—With its new catalog for radio modules and sensors, Würth Elektronik presents a whole series of new products with innovative details. For example, the component manufacturer offers many variants or operating modes with extremely low energy consumption to make increased use of combinations of sensors and radio...

Lees meer

Modules with Wirepas Mesh protocol for Massive IoT Waldenburg (Germany), 15 December 2020 – Würth Elektronik has entered into a partnership with the Finnish software developer Wirepas. The aim of the agreement is to offer a portfolio of radio modules that use the IoT network protocol Wirepas Mesh from 2021. This innovative technology can be used to create large IoT...

Lees meer

Stay Connected The 116-page Electromechanical Components 2021 catalog is now available—presenting Würth Elektronik’s broad portfolio and numerous product innovations in the field of high-quality connection and switching technology. Interesting new products include an extremely compact high-frequency coaxial connector and an SMT-mountable cable holder made of tin-coated phosphor bronze. The program of LED connectors (WR-LECO) and terminal blocks for tool-free cable...

Lees meer

Steady Current and Dimmability? - Done already! With the MagI³C-LDHM (LED Step Down High Current Module) Power Module, Würth Elektronik now has the perfect solution for LED power supply in its portfolio. To make it even easier for developers to use these DC-DC converters with integrated controller IC, inductors and capacitors—Würth Elektronik now offers an LDHM Evaluation Board. It integrates...

Lees meer

Audi presenteert nieuwe Formule E-bolide en -krachtbronAudi heeft de nieuwe auto voor het Formule E-seizoen 2020-2021 onthuld. De bolide wordt aangedreven door de Audi e-tron FE07, een compleet nieuwe aandrijflijn die voor het eerst door de Duitser autofabrikant zelf is ontwikkeld.Lees hier het bericht: https://nl.motorsport.com/formula-e/news/audi-presenteert-nieuwe-formule-e-bolide-en-krachtbron/4916184/ #WE_eiSosGroup #TechnologyPartnership #FormelE #morethanyouexpect #wespeedupthefuture

Lees meer

Switching to More Sustainable Packaging Logistics at one of Europe’s biggest manufacturers of electronic and electromechanical components has declared war on packaging waste. Würth Elektronik is putting all goods packaging processes to the test. The internal goals: drastic reduction of plastics and a switch to more sustainable materials.  Many waste-reducing measures have already been realized or are being implemented: For...

Lees meer

The perfect addition to IQD’s rubidium oscillator portfolio IQD, a subsidiary of the Würth Elektronik eiSos Group, is pleased to present its new chip scale atomic clock (CSAC), ICPT-1. The ICPT-1 uses the Coherent Population Trap (CPT) method to obtain a very stable frequency. While common rubidium oscillators detect the atomic transition with the help of a rubidium discharge lamp...

Lees meer

Passive Components, Optoelectronics and Power Modules With “Electronic Components 2020/2021” Würth Elektronik publishes an updated supplement to its general catalog. Besides a series of innovative new products, there is background and basic knowledge about EMC for high-frequency applications, gate driver circuits, single pair Ethernet, laser and infrared LEDs, as well as additional information. Practical application examples support the use of...

Lees meer

Würth Elektronik expands its WL-SWTP LED series Broad Selection of White LEDs Waldenburg (Germany), 18 November 2020—Würth Elektronik has doubled its product range of SMT assembly white top view LEDs to 30 models. The 3014, 3030 and 5630 packages of the WL-SWTP product group have been expanded to include the "A series". These new LEDs in PLCC packages feature the...

Lees meer

Virtual expert forum Waldenburg (Germany), 17 November 2020 – From 1st to 3rd of December (each from 8 am to 6 pm) Würth Elektronik organizes the virtual conference "WE meet @ digital days 2020" with an extensive program of various technical presentations. The virtual conference offers technical and technology presentations on applications and design-in support - all with an interactive...

Lees meer

From (near-)zero to hero: With the development of new WPT coils based on superconducting wire, the Würth Elektronik eiSos Group – together with its partners TU München, Slovak Academy of Sciences and Theva Dünnschichttechnik GmbH – has caused a sensation! In the context of a research work, a first demonstration transfer of high-power levels (> 5 kW) at cryogenic temperatures...

Lees meer

Small, Economical and Accurate Waldenburg (Germany), 5 November 2020—Würth Elektronik has developed a micro-electro-mechanical system (MEMS) sensor only 2 x 2 x 0.9 mm in size. Thanks to its low energy requirement and its calibrated and temperature-compensated digital output, the sensor measures humidity and temperature with long-term stability. The WSEN-HIDS humidity sensor is based on advanced MEMS technology: A dielectric...

Lees meer

Successfully Miniaturizing Radio Applications Würth Elektronik now offers developers wanting to use WE-MCA series chip antennas a free matching service. WE-MCA are compact SMT-mountable multilayer ceramic chip antennas available in numerous single and dual band versions. The antennas therefore provide a space-saving solution for GSM-900, WiFi, Bluetooth, GPS/GNSS, ZigBee or 4G/LTE enabled devices and facilitate compact designs for IoT and...

Lees meer

 IQD Frequency Products is pleased to launch its newest standard packaged clock oscillator series, the IQXO 951, which operates with a supply voltage range from 1.6 V to 3.3 V. Many of today’s industrial and consumer applications require batteries as power source. Therefore, products need to handle a change in voltage as the battery discharges. This can lead to design...

Lees meer

Colors for Feeding Plants SMT mountable LEDs in a 2835 package extend Würth Elektronik extensive range of horticulture LEDs. The three WL-SMTW series LEDs emit light of the wavelengths 450 nm (Deep Blue), 660 nm (Hyper Red) and 730 nm (Far Red) – ideal for applications controlling plant growth through specific light mixtures. Besides vertical farming and lighting in greenhouses,...

Lees meer

Analog Devices, one of world’s leading DC/DC IC-manufacturers, and Würth Elektronik, one of the largest European manufacturer of inductive components are combining forces online. They will present an 4 days webinar tour divided over 4 months. The Webinar tour will take place on four different days over the coming months, all start at 14:00 hours. The first two will be...

Lees meer

Successful sales channel Waldenburg (Germany), 20 October 2020 – Mouser Electronics has awarded Joe Haukos of Würth Elektronik eiSos with the 2020 Best-in-Class Award. The honor was the highlight of a joint quarterly review, which highlighted the great success of Würth Elektronik products in the Mouser range: Würth Elektronik is one of the most prominent rising suppliers at Mouser and...

Lees meer

Always a winner, no matter what the results  Waldenburg (Germany), 8 October 2020 – Under the sponsorship of Würth Elektronik eiSos GmbH & Co. KG, the Team Sonnenwagen Aachen once again took part in the iLumen European Solar Challenge (19-20 September 2020) – together with three other teams sponsored by Würth Elektronik Nederland B.V. In the 24-hour race in Zolder,...

Lees meer

On the 24th of November, Würth Elektronik and BLUE Guide EMC Lab (Dekimo) are holding an EMC seminar with wireless communication as the main topic. Make sure to register now! SIGN UP LINK The first 2 sessions cover Radio Frequencies (RF). We will explore the different parameters which are important for component selection, how to match an antenna, why RF...

Lees meer

Find the right components in just a few clicks Waldenburg (Germany), 23 September 2020 – As one of the leading manufacturers of electronic and electromechanical components, Würth Elektronik has been working for years with top semiconductor companies, such as Analog Devices, Infineon Technologies, and Texas Instruments to develop reference designs to help customers accelerate their projects. Würth Elektronik offers access...

Lees meer

Selecting capacitors from a cross-technology perspective Waldenburg (Germany), August 27, 2020 – REDEXPERT, the online platform for the simulation and selection of electronic components on the basis of real measurements, now has a considerably expanded presence. Würth Elektronik has heeded its customers’ suggestions from the practical area and has installed a feature that enables the direct comparison of aluminum-electrolyte and...

Lees meer

Safe Industrial Radio Applications     One powerful hardware, two flexible 2.4 GHz radio applications: Würth Elektronik presents the Bluetooth Low Energy 5.1 module Proteus-III and the proprietary version Thyone-I. The modules, measuring only 8 × 12 × 2 mm, with integrated antenna, encryption technology and six configurable IO pins, are based on the Nordic Semiconductor nRF52840 chipset. They can...

Lees meer