Recom adds RACM130E-K AC/DC with 130W peak output
Recom is expanding their AC/DC range. The cost-effective RACM130E-K series in a 2”x4” footprint is now available with 130W peak output power from a wide 85-264Vac input.
Tightly regulated single outputs available are 12V, 15V, 24V, 36V and 48VDC. Safety certifications include 2MOPP/250Vac medical for ‘B’ or ‘BF’ applications to IEC/EN/ANSI/AAMI ES 60601-1, as well as IEC/EN 62368-1, IEC/EN 60335-1 and IEC/EN 61558-1 for industrial, test and measurement, IT and household use, all to 4000m altitude. On-board dual input fusing is included. EN 55032/35 ‘Class B’ EMC emissions limits are met with a good margin and the parts are suitable for installation in surge Class 3 and Over-Voltage Category OVC III environments.
Efficiency is particularly high at 90% typical, depending on variant and is maintained down to low loads for ErP compliance, while no-load losses are less than 200mW at 230Vac. Operating temperature range is -40°C to +90°C with derating.
The RACM130E-K series is available as an open card with 2”x4” footprint and with an optional metallic enclosure and will suit a wide variety of cost-sensitive applications, where a high specification is also required.
If you want more information or if you have any questions about this product, please contact Nijkerk Electronics!
Phase Control with Galvanic Isolation 
De Itech IT6600C regeneratieve bi-directionele DC voeding 
SkelGrid 2.0: Flexible, Scalable, and Easy-to-Maintain with Integrated Master Controller and Modular Switchgear by Skeleton 
Tektronix unveils SignalVu Spectrum Analyzer Software Version 5.4 for analysis of up to eight simultaneous signals 
New AC/DC Din Rails in Slim Design by RECOM 