2 inch IPS TFT with PCAP Touch from Winstar

2 inch IPS TFT with PCAP Touch from Winstar Door: Nijkerk Electronics

The WF0200BTYAJDNG10 from Winstar is a 2-inch Portrait Mode IPS TFT-LCD display with a Projected capacitive touch panel (PCAP) resolution of 240×320 pixels. This TFT module is built-in with ST7789VI driver IC; supports MCU and SPI interfaces; the PCAP touchscreen is built-in with GT911 IC, which communicates via the I2C interface.

WF0200BTYAJDNG10 is adopting IPS panel which has the advantage of wider view angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical), contrast ratio 800:1 (typical value), brightness 400 nits (typical value), aspect ratio 3:4, the supply voltage for analog 2.4V to 3.6V, typical value 3.3V. This TFT module can be operating at temperatures from -20? to +70?; its storage temperatures range from -30? to +80?.

WF0200BTYAJDNG10

Dimension

Unit

Size

2.0?

inch

Dot Matrix

240 x RGB x 320(TFT)

dots

Module dimension

38.8(W) x 52.3(H) x3.8(D)

mm

Active area

30.60 x 40.80

mm

Pixel Pitch

0.1275 x 0.1275

mm

LCD type

TFT, Normally Black, Transmissive

TFT Interface

MCU / SPI

TFT Driver IC

ST7789VI or Equivalent

Viewing angle

80/80/80/80

Aspect Ratio

3?4

Backlight Type

LED, Normally White

CTP Driver IC

GT911 or equivalent

CTP Interface

I2C

CTP FW

V92

CTP Resolution

240 * 320

Touch Panel

With CTP

Surface

Glare

 

If you want more information or if you have any questions, please contact Nijkerk Electronics!