20 maart 2023 Door: Electrometric B.V.

�

TBJT01

The TBJT01 is a wideband injection transformer for control loop stability measurements. It provides galvanic isolation between the swept signal source and the control loop. Theinjection transformer is internally terminated with a 5 Ohm resistor and protected with a 100 mA fuse. The usable frequency range is 10 Hz to 45 MHz=

Compliance: RoHS
Termination resistor: 5 ?
Fuse: 100 mA (Littlefuse 0451.100MRL); secondary (output) side
Turns ratio: 1:1
Characterized freq. range: 1 Hz to 100 MHz
Usable frequency range: 10 Hz � 45 MHz
3 dB frequency range: 15 Hz � 9 MHz typ.
Insertion loss (S21): 15.5 dB typ.
Capacitance: 90 pF @ 1 Khz; primary to secondary winding
DC saturation current: 12 mA
Max. voltage rating: 600V CAT II; primary to secondary winding
Input connector: 50 ? BNC female,
Output connector: 4 mm safety banana jacks, 20 mm spacing
Operating temp. range: 0�C � 60�C
Enclosure dimensions: 70 mm x 60 mm x 140 mm
Weight: 250 g

�

TBJT02

The TBJT02 is a wideband injection transformer for control loop stability measurements. It provides galvanic isolation between the swept signal source and the control loop. The injection transformer is internally terminated with a 5 Ohm resistor and protected with a 100 mA fuse. The usable frequency range is 1 Hz to 7 MHz.