Winstar introduces 2.7? Touch OLED with PCB & Frame

29 juni 2021 Door: Nijkerk Electronics

Winstar WEP012864Q-CTP model is a COG Graphic OLED with Capacitive Touch Panel, diagonal size 2.7 inch, made of 128x64pixels. This OLED module is built-in with SSD1309 IC; it supports 6800/8080 8-bit parallel, I2C, and 4-Wire SPI interface, supply voltage for logic 3V, the display with 50% Check board current is 175mA @3.0V VDD (typical value), driving duty 1/64. This model is having Capacitive Touch Panel on module; it is built-in with GT911 IC which supports I2C interface, one detect point for CTP, normal glare surface glass. The module is having PCB board on module which is suitable for customers to use wire connection; customers do not need to develop extra PCB for their applications. Also, we integrated VCC circuit on PCB to make it easier for customers to use.

WEP012864Q-CTP model is a COG OLED display with a PCB on module. This PCB board with four mounting holes is an easy method for customers to fix modules on their applications. This OLED module is suitable for smart home application, medical device, industrial control, etc. WEP012864Q-CTP model can be operating at temperatures from -20? to +70?; its storage temperatures range from -30? to +80?.

WEP012864Q-CTP Dimension Dot Matrix 128 × 64 dots Module dimension 82.0 × 47.5 × 8.65 Max. mm Active Area 61.41 × 30.69 mm Pixel Size 0.45 × 0.45 mm Pixel Pitch 0.48 × 0.48 mm Display Mode Passive Matrix Display Color White/Yellow/Sky Blue/Green Drive Duty 1/64 Duty OLED IC SSD1309 OLED Interface 6800,8080,4-Wire SPI,I2C Size 2.7 inch CTP IC GT911 Detect Point 1 CTP Interface I2C Surface Normal Glare

For more information, please contact Nijkerk Electronics

• 
• 
• 
• 
•