PLOT Conferentie

Omgevingstesten, reliability, mechanische beproevingen, klimaat

Particle measurements at DIFFER made possible by new Delta power supplies

Particle measurements at DIFFER made possible by new Delta power supplies

door C.N. Rood

DIFFER, the Dutch Institute for Fundamental Energy Research, is an institute specialised in fusion energy and solar fuels research. DIFFER's research is of great value for the nuclear fusion reactor ITER. This technology should provide our energy in the future. Wim Melissen is responsible for the particle accelerator at DIFFER as Ion Beam Technician / Operator. We spoke to Wim about ITER, the role of DIFFER in this project and about the collaboration with CN Rood. By using Delta power supplies (supplied by CN Rood), new measurements can now be performed that were previously impossible.

Nuclear fusion reactor ITER

In Cadarache (southern France), an advanced pilot version of a nuclear fusion reactor, ITER (International Thermonuclear Experimental Reactor), is currently under construction. This is intended to be the first nuclear fusion reactor to generate more energy than is needed to heat and control the fusion plasma. The advantage of generating energy with nuclear fusion is that such a plant does not emit CO2, uses widely available raw materials, and the fusion process is safe and does not produce radioactive products. In the fusion reactor, deuterium and tritium are heated to extremely high temperatures. (around 150 million degrees Celsius). To prevent the hot plasma from hitting the relatively cold wall of the nuclear fusion reactor and thus losing its heat, magnetic confinement is used. Moreover, you also have to make sure that the apparatus in which you make this hot plasma can withstand these high temperatures.

 

Tungsten wall

The particles that manage to escape despite the magnetic confinement cause the wall to take quite a beating. These particles bombard the wall with as many as 1024 particle impacts per square meter per second. When choosing the wall material, the least sensitive to this was considered. The wall also had to withstand heat of more than 10 MW per square meter. You can compare this to conditions in a welding flame or on the surface of the sun. Tungsten was chosen for the ITER project because this material has a very high melting point (3500 degrees Celsius), good thermal conductivity and a high mass number. The latter ensures that the relatively light particles created in nuclear fusion do not easily detach tungsten atoms from the lattice.

 

DIFFER examines wall of tungsten

At DIFFER, an Upgraded Pilot-PSI (UPP) particle accelerator is used to test the Tungsten. Wim Melissen: "The Upgraded Pilot-PSI (UPP) is a new test facility within DIFFER used to generate high-flux magnetised linear plasma and that makes it possible to simulate ITER conditions. This new setup also allow us to monitor everything in real time. In the past, test data was stored and read out and analyzed later. What we want to measure is whether the surface of the tungsten test component has deteriorated. What you don't want is for the properties of the tungsten wall to change and for the ITER reactor to have to be shut down in the future."

 

Delta power supplies crucial for measurements

The plasma in the linear plasma generator is generated by a DC cascaded arc, and magnetised by 3 sets of copper coils. Wim Melissen: "We used three power supplies altogether 400A, the problem with these power supplies was a ripple of 4A at 40KHz. This ripple disturbed the measurements and made the results useless. Tests were scheduled but we came to the conclusion that with these power supplies, the tests could not go ahead. We then contacted CN Rood. CN Rood had Delta power supplies (SM70-CP-450) in stock and we hired them for the test. This was arranged within a few days and the tests could go ahead. The results were so good (a ripple of 0.1A at 300KHz) and the interference, which is 40x lower, could be completely filtered out. We are now able to make measurements that we could not do before. We like the Delta power supplies so much that we bought them immediately. We are very satisfied with the power supplies and CN Rood's fast service!"

 

For more information contact CN Rood or DIFFER!

Gerelateerd:


Email:
Website: http://cnrood.com

C.N. Rood

Degelijk.  Betrouwbaar. Kennispartner.

De CN Rood groep is koploper in kennis en oplossingen op het gebied van test- en meetapparatuur. We onderscheiden ons met een persoonlijke en klantgerichte aanpak. Onze klanten zoeken vaak niet een product, maar een oplossing en wij hebben allemaal de gedrevenheid om mee te werken aan die oplossing. Wat wij het liefste doen: continu bezig zijn met de nieuwste ontwikkelingen op het gebied van test- en meetapparatuur. Nu, en in de toekomst. Want daar ligt nu eenmaal onze passie: het precies willen weten. Zo kunnen we onze klanten optimaal verder helpen.

Wij denken mee, adviseren en begeleiden onze klanten in het maken van de juiste keuze in hun test- en meetapparatuur. Mensen in verschillende sectoren vertrouwen op onze expertise en ons advies. We werken voor overheid, wetenschap, onderwijs, lucht- en ruimtevaart- en auto-industrie in Noord-Europa en de Benelux. Daaronder bevinden zich vele prestigieuze en vooraanstaande organisaties. Vanuit locaties in Zweden, Nederland en België werken meer dan zestig toegewijde professionals aan oplossingen variërend van communicatie-testapparatuur en algemene test- en meetinstrumenten tot apparatuur voor data-acquisitie, logistieke automatisering, aangevuld met consultancy, training en turnkeyoplossingen.

We hebben een historie die teruggaat tot 1938. Onze oprichter, Cornelis Nicolaas Rood, was destijds een pionier in moderne elektronica. Onze mensen bevinden zich ook anno nu graag in de frontlinie van technologische ontwikkelingen. Op onze eigen manier leveren we zo een bijdrage aan belangrijke maatschappelijke vraagstukken. Bijvoorbeeld in energietransitie, quantum computing, medische technologie, de zelfrijdende auto, de auto op zonne-energie, de energie transitie en alle andere deeptech die bijdraagt aan de schonere en betere wereld van morgen.

Daarom letten we ook op onze eigen impact op het milieu en klimaat. Aangezien wij vooral een adviserende functie hebben is onze eigen milieu-footprint gering. Vanzelfsprekend zien we wel toe op een zo duurzaam mogelijke productie van de apparatuur die wij verkopen en zorgen we voor een maatschappelijk verantwoorde bedrijfsvoering. Al onze producten kopen we uitsluitend in bij gecertificeerde fabrikanten die werken met herleidbare en verantwoorde grondstoffen. Gebruikte apparatuur wordt kosteloos opgehaald en gerecycled.

Het zijn maar een paar voorbeelden om duidelijk te maken dat we hechten aan een langetermijnvisie op de wereld om ons heen. Want juist met een geschiedenis van meer dan tachtig jaar kun je goed vooruitkijken. Daarom blijven we ook vooroplopen. Onze brede en diepe technische kennis van test- en meetapparatuur, in combinatie met onze persoonlijke connectie met onze klanten, maken ons uniek in de markt. De CN Rood groep is uw degelijke en betrouwbare kennispartner voor test- en meetapparatuur!

-----

Dependable. Reliable. Knowledge Partner.

The CN Rood Group is a leader in knowledge and solutions in the field of test and measurement equipment. We distinguish ourselves with a personal and customer-oriented approach. Our customers often seek not a product but a solution, and we all have the drive to contribute to that solution. What we like doing best: continuously working on the latest developments in test and measurement equipment. Now, and in the future. Because that's where our passion lies: wanting to know exactly what is going on. That way, we can help our customers in the best possible way.

We think along, advise and guide our customers in making the right choice of test and measurement equipment. People in various sectors rely on our expertise and advice. We work for government, science, education, aerospace and automotive industries in Northern Europe and the Benelux. These include many prestigious and leading organisations. From locations in Sweden, the Netherlands and Belgium, more than sixty dedicated professionals work on solutions ranging from communication test equipment and general test and measurement instruments to data acquisition equipment, logistics automation, complemented by consultancy, training and turnkey solutions.

We have a history dating back to 1938. At the time, our founder, Cornelis Nicolaas Rood, was a pioneer in modern electronics. Even today, our people enjoy being at the forefront of technological developments. In our own way, we contribute to important social issues. For instance, in energy transition, quantum computing, medical technology, the self-driving car, the solar car, the energy transition and all other deep-tech that contributes to the cleaner and better world of tomorrow.

Therefore, we also pay attention to our own impact on the environment and climate. Since we mainly have an advisory function, our own environmental footprint is small. Naturally, we do see to it that the equipment we sell is produced as sustainably as possible and we ensure socially responsible business practices. We purchase all our products exclusively from certified manufacturers working with traceable and responsible raw materials. Used equipment is collected and recycled free of charge.

These are just a few examples to make it clear that we value a long-term view of the world around us. Because it is precisely with a history of more than eighty years that it is easy to look ahead. That's why we stay ahead. Our broad and deep technical knowledge of test and measurement equipment, combined with our personal connection with our customers, make us unique in the market. The CN Rood group is your solid and reliable knowledge partner for test and measurement equipment!