Power Quality Monitoring, Power Conversion, Power Applications
The MIZI03 series is a railway-certified 3W isolated DC-DC converter meets railway certification standards EN50155 and EN 45545-2. The MIZI03 series features a 3000VAC high isolation voltage and a reinforced insulation system, designed to prevent damage to the backend system and mitigate the risk of injury to operators. Main Features Industrial Standard DIP-24 Package Ultra-wide Input Ranges 9-36VDC, 18-75VDC, 40-160VDC...
The MPX2003 is an all-in-one flyback controller with an integrated primary driving circuit, secondary controller, synchronous rectification driver, and safety-compliant feedback. It offers the benefits of both primary-side regulation (PSR) and secondary-side regulation (SSR). The MPX2003 is available in SOICW-16 and TSOICW16-15 packages. Main Features Isolation Voltage >3750VAC 100% Production HIPOT Compliance Testing UL1577 and IEC62368 Safety Approved, DIN VDE...
MPS Power Modules offer superior performance and size advantages when compared to other industry leading solution. The monolithic design allows for faster switching frequency, which leads to ultra fast transient response and size reduction. Our high efficiency and advanced packaging make thermal design easy. The modules integrate the maximum number of components, including the inductor, in a single package while...
The energy transition is in full swing and poses major challenges for energy suppliers. The decentralised generation of electricity from renewable energy sources requires new solutions for the conversion, storage and distribution of energy. TPEG is a leading supplier of transformers and electronic components for the energy transition. We have many years of experience in the development and production of...
The series provides a broad DC input voltage range, catering to standard 48V, 72V, 96V, and 110V railway battery requirements as outlined in EN50155. Its high-efficiency design minimises heat output, yielding a wide operating temperature range of -40°C to +70°C (+85°C for 10 minutes) with minimal cooling requirement. It offers standard output voltages of 12V, 24V, 36V, and 48V, all...
New 240W dual-output 12S24S switch-mode power supply, blending advanced technology and exceptional design for superior energy solutions. The AQF240 12S24S meets ESD testing standards up to Air 27KV and incorporates a dual-layer PCB board for enhanced durability. It's a cost-effective solution, replacing two power supplies and standing out with efficient operation, enclosed type design, complete power protection, and space-saving advantages....
Improve the lifespan of your mobile medical device's battery with added flexibility and convenience. With a weight that is 30% lighter than other options, this system is incredibly easy to transport and install on your upcoming medical cart design. The MediPowerTM Uninterruptible Power System can also be effortlessly personalized to align with your specific technological demands, without incurring any additional...
5.5kW Water-cooled power supply - Ideal solution for embedded DC systems demanding industrial and military applications Providing high-operating efficiency along with excellent reliability, compact size, and easy maintainability, LiquaCore™ power supplies are the ideal solution for embedded DC systems in demanding industrial and military applications. A fully adjustable, wide-range DC output is configurable via digital interface with real-time feedback.Packaged in...
The RP681 series offers a range of rated currents, including 250A, 320A, 400A, 600A, 800A, and 1000A. It features a single-stage line filter and is available with Bus Bars to support high current capability. With its compact and high-current, high voltage design, the RP681 series is optimized for various applications, including high-power rectifiers, inverters, induction charging, industrial chargers, solar applications....
Power distribution is the fundamental functionality of a PDU. Astrodyne TDI will work closely with the end- user to set requirements, stipulating the number of connections, along with their power rating. Current capabilities range from small PDUs delivering 100's of watts to large scale Power Systems delivering 100's of kilowatts. Supported power input sources include: uninterruptible power supplies (UPS), power...
DG11 and DG12 have been upgraded for an IEC 60320 and IEC 60529 compatible appliance inlet. In combination with the dedicated power cord, an IP54 protection rating is achieved when plugged in. An IP54 connection provides excellent protection against dust particles and is splash-proof.
COMPACT HI-CURRENT HI-PERFORMANCE DC FILTER FOR EV CHARGERS
The XL180 is not only one of the smallest 180 Watt power supplies on the market, it is also available in a choice of three different packages to suit diverse application requirements; XLO Open-Frame models, XLE Enclosed models and XLD DIN Rail models.
Astrodyne TDI's PowerBridge™ AC uninterruptable power supply provides power backup for critical applications. In the event of a power outage, the PowerBridge™ allows users to bridge the power gap of a system while the facility emergency power ramps up. This power solution can provide the necessary power for medical devices and imaging during surgical procedures to ensure successful results. The...
The EDP400 series is the first standard line of power adapters above 60W that achieves CF leakage and Class B EMC with only a Class II input. This line of power adapters operates over the input voltage range of 90 to 264 VAC at 50-60Hz frequency and produces 400 Watts of regulated DC output power. The EDP400 series is safety...
Astrodyne TDI’s ASX0550-xx-20 is a medical grade multi-output low voltage power system in a 1U rack mount configuration that is Class I input, with 20 electronically controlled and monitored 2.2A outputs (combined max. 550W). All outputs are 2 MOPP isolation and BF leakage current protection. This power supply can operate over the input voltage range of 90 to 264 VAC...
New range of high-performance EMI/EMC filters for fast and ultra-fast DC chargers. The new RP695H DC EMI filters combine high performance and compact factors. These high-performance EMI/EMC filters are designed to improve cost and shorten the time-to-market for DC charger OEM. The RP695H series is a high-performance, dual-stage DC EMI/EMC solution that operates up to 1500 VDC. For performance, cost,...
The F-series of Facility/Shielded Room EMI Filters include current ratings from 20 A to 2500 A, with operating voltages between 277/480 VAC and 345/600 VAC, to support a variety of applications. The F Series filter designs are agency approved and comply with the requirements of MIL-PRF-15733 and MIL-STD-810. Main Features: Attenuation (insertion loss) is 100dB @14KHz to 10GHz measured in...
Reduce Power System Complexity and Time to Market with the World Leader in Liquid Cooled DC Power Solutions. Our multiple Liquid Cooled Power Supply solutions offer a wide range of models with fully programmable outputs. Multiple control modes provide ultimate application flexibility and increased system performance. These advanced liquid-cooled AC/DC and DC/DC power solutions include power modules that offer up...
Size: 1.46? x 1.08? x 0.69? Universal I/p Range 90-305VAC No Load Power Consumption<0.1 I/O Isolation 4000VAC 62368-1&60950&60335-1&61558-2-16 Safety Approved Datasheet Find out more about ARCH
Universal I/p Range 90-305VAC No Load Power Consumption<0.1 I/O Isolation 4000VAC Operating Tm:-40°C~+85°C 62368-1&60950&60335-1&61558-2-16 Safety Approved Datasheet Find out more about ARCH
ITE Power Module – 50/60 Watt Size: 2.92? x 1.85? x 0.91? I/p Volt: 90-264 or 90-305 VAC No Load Power Consumption<0.1 I/O Isolation 4000VAC Operating Tm:-40°C~+85°C 62368-1&60950&60335-1&61558-2-16 Safety Approved Datasheets Find out more about ARCH
DC-DC Converter -20 Watt Size: 1.02? x 1.02? x 0.45? High Efficiency up to 90% Without Tantalum Capacitors 4:1 Wide Input Range Operating Tm:-40°C~+85°C Safety Meet 62368-1 & 60950 Datasheet Find out more about ARCH
DC-DC Converter -50 Watt Size: 2.01? x 1.0? x 0.47? High Efficiency up to 91% 4:1 Wide Input Range Operating Tm:-40°C~+80°C Safety Meet 62368-1 & 60950 Datasheet Find out more about ARCH
ITE Switching PSU – 240 Watt Size: 4.02” x 2.05” Open Frame and U Bracket Package High Efficiency up to 94% No Load Power Consumption<0.5W Operating Tm:-30°C to +80°C UL / IEC / EN 62368-1 Safety Approvals Datasheet Find out more about ARCH
ITE Switching PSU – 500 WattSize: 5.11” x 3.25”High Efficiency up to 92%Operating Tm:-30°C to +80°CUL / IEC / EN 62368-1 Safety ApprovalsOperating Altitude 5000MActive PFC Function Datasheet Find out more about ARCH
AC EMI FilterCurrent rating 1-2AVery Compact PCB-mounting Design, Easy to MountTo Enhance the Anti-interference Performance and Reduce CE and REIt’s Suitable for 1W~150W Power Products3-Year Product Warranty Datasheet Find out more about ARCH
The MSR192K-16A is a miniature, switching voltage regulator that provides up to 16A of output current. The MLSR192K-16A operates from an 8.3 to 14 VDC input, producing a single tightly regulated output at up to 16A. The output can be adjusted over a range of 0.7525V to 5.0V with a simple trim. Standard features include efficiency as high as 95%,...
The AC/DC Switching Power Supplies from Arch Electronics are ranging from 60W – 700W. They have a built in EMI filter and reach a high efficiency of 93%. The Industrial switching power supply units (PSU) are certified with UL/IEC/EN 60950 and are 62368 safety approved with 3 year warranty. Universal I/P 90-264VAC, 47-63 HzUltra Compact SizeHigh Efficiency up to 93%With...
The ML100E series is a family of low cost 1W DC/DC converters in a miniature SMT case. These converters are an excellent choice for board level power distribution applications requiring very small size, automated assembly, high performance features and low cost. The ML100E family is packaged in a miniature, SMT case with an industry standard pin out. All models are...
We offer digitally, controllable, precisely matched power supply and drive solutions from a single source The key to a successful electric mobile unit is a reliable and well performing driveline – FRIWO supports you to have the best possible solution for all components needed when converting AC mains to energy driving your application. A complete solution for electric scooters, go-carts, golf...
Silvertel’s Ag5300 is to be released as a 5V output version. The Ag5305 will be the first PoE+ module delivering up to 25 Watts of output power at 5V that requires less than 10.3cm2 of PCB space. This is ideal for any applications where space is at a premium, such as SBCs, AI applications, Wireless IoT Access Point, touch panel...
The High Isolation SiC Driver DC/DC MSC215-18 provides asynchronous outputs of +18V and -3 VDC; the recommended gate bias level for many SiC semiconductors. The output current is ±100 mA. Standard features include continuous short circuit protection, 83% efficiency, 3.5 kVAC I/O isolation and miniature SIP packaging. Features:+18V / -3V Outputs3,500 VAC IsolationLow Isolation Capacitance15 VDC InputShort Circuit ProtectionMiniature SIP...
10W Isolated/Regulated DC-DC Converters with wide input ranges in the compact 16 pin DIP package measuring only 0.94×0.54×0.31”, offering a very high power density up to 65W/in3. This level of integration offers system designers the opportunity to reduce overall PCB layout area or add more features into existing PCB profiles. The MDWI10 family of DC-DC converters consists of 16 models...
The FSP350-F35-Axx is a single voltage output power supply that includes the specifications of 12V/18V/24V/54V, suitable for applications including Information Products, Networking, PoE, Embedded Systems, etc. We also provide custom and semi-custom services. FSP350-F35-Axx Series is a class-I design that features the LLC architecture with 94% high efficiency. Low profile 3? x 5? x 1.34? with 350W output power under...
Ag5810 is a Type 4 – Class 7 PD, which provides 60W of power by displaying the correct class pulses to a IEEE802.3bt PSE. A complete high efficiency DC/DC converter is included, that generates a nominal 12V or 24V output, which can be programmed down to 11V, or up to 30V, this is especially useful for applications requiring the inclusion...
FRIWO is completely redefining power supplies in terms of design. But the interior also has a lot to offer. High efficiencies and low standby losses ensure compliance with the latest standards. In addition, the lowest leakage currents, the MOPP protection class and a long service life enable use in the most demanding environments. And best of all: delivery times that...
