Three-Phase AC-filter capacitors for harsh environments
The Faratronic C67 Three-phase AC-filter capacitor is designed for use in harsh environments. The capacitor is made of metallized polypropylene, is explosion-proof (ATEX), self-healing and has a overpressure tear-off fuse more safety. The C67 is used for AC filtering, LCL filtering and power factor correction in application like wind turbines or uninterruptible power supplies.
The capacitor should be installed in a cool and well-ventilated place. The capacitors’ working ambient temperature that we recommend is 55? (or lower). When the ambient temperature exceeds 55?, considering the ambient temperature rising, the active power of the capacitor should be gradually decreased. When it gets to the highest temperature (85?), the active power of the capacitor should be decreased to 0 Watt.
For discharging are discharge resistors required. Resistors are needed for human protection (risk of electric shock) and for re-switching capacitors in automatic PFC equipment (Phase opposition). Discharge resistors must be designed to discharge capacitors within 180 seconds to 75 V or lower.
Expected lifetime of the capacitor
For capacitor applications, various factors will affect the expected lifetime of capacitors, such as voltage, temperature, current, network harmonics, humidity, lighting or radiation and other unknown factors. Voltage and temperature are the most basic factors. Because of all the factors listed above, except voltage, other factors will eventually show the rise of internal temperature of capacitors. The following curves show the relationship between capacitor life and voltage, temperature, etc. For your reference.
?Note?UW is the actual working voltage)
Specifications
Reference Standard |
IEC61071 |
Operating temperature range (?hs) |
-40? ? 85? (It is suggested that ?hs should be guaranteed to be less than 70? in the use process, otherwise the lifetime will be affected, as shown in the expected lifetime curve.) |
Rated RMS Voltage (Urms) |
230Vac ? 850Vac |
Rated Frequency |
50/60Hz |
Capacitance CN |
8?F ? 330?F |
Capacitance Tolerance |
±5%, -5% ? +10% |
Capacitor internal connection |
Delta connection??? |
Storage Temperature |
-40? ? 70? |
Case |
Aluminum can |
Test voltage Between Terminals (UT-T) |
2.15Urms or 1.5UN ,10s |
Test voltage Between Terminals to Case |
4 000Vac, 10s) |
Insulation Resistance (IR×CN? |
?10 000s (20?, 100V ,1min) |
Dielectric dissipation factor tan?d |
2×10-4 |
Explosion-proof device |
Three phase overpressure disconnector |
Internal stuffing |
Vegetable oil (Non PCB) |
Expected lifetime |
|?C/C|?5% after 100 000h @0.8 Urms, ?hs ?70? |
Mounting position |
Vertical (The terminal must be upward) |
Max. Torque of Installation |
10 N·m?M12? |
Max. Torque of terminals |
2N·m?M5??3N·m?M6? |
4N·m?M8??6N·m?M10? |
|
Cooling |
Naturally air-cooled or force cooled |
Maximum allowed altitude |
2 000m |